Below you'll find each of the steps to making your Rose Bush coaster, with recommendations on the order to stitch each element. If you're a newbie to crafting it will be worth following this step-by-step, so that you can get comfortable with the techniques and tools used in this kit.

But if you want to create your own variations, you're more than welcome to stitch each section in whichever order you want! Don't feel constrained by our guidelines.

Step 1: Fuzzy Loops (using dark green chenille yarn)

Step 2: Bobbles (using variegated green bobble yarn)

Step 3: More Fuzzy Loops (using dark green chenille yarn)

Step 4: Latch-Hooking (using mint green and sage green milk yarn)

Step 5: Feather Yarn Grass (using dark green feather yarn)

Moving onto your decorative elements ...

Step 6: Lazy Daisy Flowers (using mint green milk yarn)

Step 7: Pom Poms (using deep green and berry red milk yarn)

Step 8: Pipe Cleaner Roses (using red pipe cleaners)

You can also use the image below to see the details of each element on your coaster.

Rose Bush Walkthrough

Below is a video that will walkthrough the creation of your moss coaster. This video will show you the process, but it won't include detailed tutorials. So if you're new to making moss coasters - keep scrolling to see the full video tutorials for each technique below.

This video is intended to be a relaxing walk you through of each step in your moss coaster, so that once you know the techniques you can craft along with us.

Step-By-Step Tutorials

This guide will walk you through each step of your moss coaster, and include video tutorials for each technique you will need to learn. If you're already familiar with the techniques used for moss kits, you may just want to watch our walkthrough video (shown above) without needing to dive deeply into each step.

First Things First - Transferring your Stencil

Your first step in creating your moss coaster is to transfer your coaster design from the stencil onto your latch-hooking canvas. To do this you'll need your canvas and a marker of some kind. We recommend using a sharpie or similar permanent marker, but a regular pen or drawing marker will work just fine.

Simply lay the canvas on top of your stencil and use the marker to trace the design behind it. The stencil matches our design with the smaller shapes roughly indicating where we will stitch each type of 'moss' in the following steps.

Feel free to get creative with the shape of your design, as your coaster doesn't have to be exactly like the stencil. You could make it a little larger or smaller depending on how you'd like to use it. Just remember to leave a 1/2 inch space between your coaster shape and the edge of the canvas.

TIP: Why not move the smaller shapes around within your coaster? You can get creative with the layout.

1. Fuzzy Loops

The first step to creating your moss coaster is going to be adding Fuzzy Loops to your design. You'll be using your dark green chenille yarn to create these soft and textured loops in the upper middle space on your design.

Watch the video below to learn the technique.

2. Bobbles

Next its time to create some lovely bobbled textures! You'll be adding bobbles using your variegated green bobble yarn, these will fill the shape on the upper left side of your coaster. Don't worry if the highly textured bobbles spill out over the space you've drawn, they're meant to be bulky and textured.

To recreate the look of our design exactly, you want to focus on using more dark green yarn pieces and less yellow pieces. You don't need to remove the yellow entirely, but weaving in more darker green will give that deeper tone to your coaster.

Check out the video below to learn the technique.

3. More Fuzzy Loops

Now that your bobbles are complete, its time to fill the remaining space on the left side of your coaster with more fuzzy loops. Using the same dark green chenille yarn, use the technique shown in our video tutorial to fill this space entirely.

If you need a refreshed of the technique, scroll back to step 1.

4. Latch-Hooking 'Hair' Moss

This next textured section will be familiar to you if you've done one of our latch-hooking kits before. This time we use a slightly different technique to latch hook our yarn to look soft and 'hairy'. Use your latch-hooking 'hair' moss technique to fill in the space to the left side of your template.

Preparing your cut yarn:

To begin, you'll be cutting your mint green and sage green milk yarn into 6cm lengths. To do this, you'll create a cardboard template that is 3cm in width, and wrap a strand of each colour milk yarn around the length of the template. Use sharp scissors to cut down the side of your wrapped yarn, creating many small pieces of 6cm yarn. 

Our video below will show you the technique for creating a simple cardboard template! 

Note: Don't cut up all of your mint green yarn! You want a small amount leftover for the embroidered flowers you'll be stitching in step 6.

Latch-hooking colours:

Now that your yarn is prepared, its time to stitch! Each latch-hook knot will be made using 2x pieces thread to give it a rich density, 1x piece of mint green and 1x piece of sage green yarn will be used to create each knot. You'll be filling in the section on the right side of your moss coaster design.

TIP: You can add some of your other milk yarn colours to this latch-hooked section if you would like, this can be done easily by trimming some other colours and creating your colour scheme how you would like. 

Trimming: I find that these 'hair' sections look lovely when they are left shaggy and organic. But you can use a sharp pair of craft scissors to trim any uneven or stray lengths of yarn, if you would rather keep them looking neat and orderly.

Watch the tutorial below to learn the technique. In general, the technique below is easiest when stitching multiple strands of yarn.

You can also try this technique as well! This is often used for single strands of yarn, but you may enjoy stitching this way too. It's worth trying both methods and seeing which you prefer.

5. Weaving your Feather Yarn Grass

Now it's time to weave in the 'grass' on your mossy coaster. Because this coaster has quite a few decorative elements, we've kept the feather yarn section nice and simple.

Using your dark green feather yarn, use the technique in the video below to cover entire remaining space on your coaster. It's worth taking the extra time to weave under any bobble or latch-hooked yarn sections so that you can ensure the coaster is entirely covered.

Follow the below video tutorial to learn how to weave your grass section. Its a very simple technique, using your weaving needle you'll be stitching back and forth to cover the canvas section.

6. Lazy Daisy Embroidered Flowers

Now that your coaster base is entirely covered, its time to add some fun, decorative details! You'll begin by stitching a few simple embroidered flowers onto your feather yarn base, using your mint green milk yarn. We've made our flowers with only 4x petals each, but you're welcome to make your daisy flowers with as many petals as you would like.

Similar to your latch-hooking section, you can substitute your daisy flowers with other milk yarn colours if you like!

Watch the video below to learn how to add embroidering details to your coaster.

7. Pom Poms

Next its time add a few fluffy Pom Poms to your coaster. 

Watch the video below to learn to make pom poms and their variations. Then follow along with the yarn colour and sizing if you'd like your pom poms to look exactly like our finished coaster.

2x Deep Green Small Pom Poms - These are classic mini pom poms using your deep green milk yarn. Create these pom poms by placing your yarn length between your pointer and middle finger, then wrapping your yarn approximately 20x around your two fingers. When you've removed and tied your pom pom, trim the loops and use your plastic weaving needle to separate the strands of yarn to create a fluffy effect.

2x Berry Red Looped Small Pom Poms - These are even easier to create than your classic pom poms! Using your berry red milk yarn, place the yarn length between your pointer and middle finger, then wrapping your yarn approximately 20x around your two fingers. Remove the pom pom and tie tightly, leaving it in its looped form to appear like a flower.

Placement on Coaster: Your finished pom poms can be placed anywhere on your coaster, but if you want to recreate our design exactly you'll want to place your 2x berry red pom poms nestled into your bobble section on the top left side of your design. You'll then want to place your deep green pom poms on your feather yarn base, 1x to the bottom left of your base and 1x to the top right of your base.

TIP: You can really get creative with your pom poms! Feel free to mix up the colours of milk yarn and the pom pom techniques you use to make this coaster your own.

8. Pipe Cleaner Roses

You've reached the final decorative step - its time to add the ruby red roses onto your coaster! Our pipe cleaner roses are actually incredibly simple to make, despite their delicate look and feel. You'll be making 3x roses for your coaster, but we've included enough pipe cleaners to make 4x total so you have extra.

Pipe Cleaner Colours:

You will need the following pipe cleaners to make your roses:

3x red pipe cleaners

Easy as that! Watch the video below to learn how to create and attach your roses.

Backing your Coaster

Congratulations on finishing the main part of your coaster! Now you're onto the home stretch, its time to work on the back of your coaster.

There are 2x steps to finishing your coaster, which we show in the below tutorial. First you'll need to roughly trim the canvas edging and sew it down to the back of your piece. 

Then it's time to back your coaster with your felt either with glue or by sewing it. If you're using it as a decor piece or to hang on the wall, it may be better for you to leave it at it's current stage. It will be easier to hang on a wall hook if the back is free from felt.

Sewing your Backing

Our kit includes all of the supplies you need to sew the backing of your coaster.

To sew your fabric you'll want to trace the shape of your coaster so that you can cut out the felt fabric to match the shape. You can do this with a pencil or pen.

You will then need to pin your felt backing to your coaster so you can begin sewing the edges. You can do this by using sewing pins, bulldog clips or even tacking the back with a hot-glue gun. I find bulldog clips the easiest method of holding my coaster to the felt.

Using 3-strands of your cotton thread, begin stitching your canvas to your mossy coaster using a whip stitch. This just means that you will whip your thread around and around the edge of your coaster as you go around. Don't worry if your stitches don't look perfectly neat, they'll blend into the grass on your coaster and won't be visible when you're finished.

Gluing your Backing

If you have any fabric glue handy or a hot glue gun then you can also glue the backing of your coaster. We've included a glue stick for a standard craft hot glue gun, as well as a glue paddle if you have fabric glue.

To glue your fabric you'll simply place fabric glue across the middle of your felt square and place your coaster on top. Allow it to dry so that the coaster is secure - you may want to put a heavy book on top of your coaster to add pressure. Once it's dry you can take a sharp pair of scissors to cut around the coaster. 

You can then top up the glue on the edges, if any sections are lifting up.